Tacoma and 4Runner T-Case Crossmember

Our new crossmember for Tacomas and 4Runners is now available! This crossmember works on with single or dual cases, 4cyl or V6, manual or automatic! It will also work on vehicles equipped with push-button 4wd! It is obviously based on our earlier crossmember design, and shares many of the features. You can lift or lower your t-case at install time. And with just new frame brackets, move your case back when you install a dual transfer case system! The crossmember is made from 3/8" thick steel plate. It comes complete with longer 8mm bolts, NEW bushings, frame brackets and mounting hardware. This system allows you to remove the stock crossmember under the transmission, and remove the mounting brackets from the frame as well, for a smooth underbelly. Order yours today, and rid yourself of the stock rock anchor crossmember!

NEW BUSHINGS! We have changed the bushings we supply with our crossmembers!  ALL our crossmembers now feature polyurethane bushings! These new bushings are slightly softer, offering more dampening than the older version.

So now the questions is; Why bother with a "replacement" crossmember, and re use your worn out, torn $95 stock rubber junk, when you can get something better, for less?! We give you MORE clearance, MORE strength, NEW bushings, NEW hardware, and WAAAY more strength!! Compare ours to the competition, and enjoy the trail more, as you go farther with Front Range Off-Road!!

Furnished bare steel, for you to paint to your preference!

Please note, there were designed around the 96-04 tacoma trucks.  While the frame width, and tcase pattern matches 05-15 and 96-04, trimming, or modification may be necessary on the later trucks, 4runners, and FJ cruisers.

Read Off-Road.com's write up on our Tacoma Crossmember!