Diamond Axle BOLT IN upgrade for your 05+Tacoma rear axle! This is a HUGE upgrade, yet increases ground clearance under the diff!
-Big 3.5" .375"wall DOM axle tubes, handle weight and punishment with ease. Stock axle tubing is about 1/2 the thickness!
-BIG diff upgrade! The 9.5" ring gear is 1.5" larger in diameter, nearly 1ton Dana 60 size!
-Ring gear is about 20% larger than 8" Elock, or 8.4 diffs(yeas the 8.4 is only actual 8" in diameter!)
-Gears available for the 9.5" are 3.7, 4.10, 4.56, 4.88, and 5.29 so you can readily match your front gear ratio
-Drive shaft bolts up directly, same length, and angle as with the 8" diff!
-Retains OEM width, using oem axle shafts, or upgrade to aftermarket axle shafts
-Retains OEM wheel bearings, sensors to keep ABS, ATRAC, speedometer, etc all working just the same
-Brake line and Wheel sensor wires bolt and clip to provided mounting locations
-Requires 9.5" built diff, 30 spline shafts, originally for Landcruiser, inquire for quote with your gear ratio and locker of choice!