Diamond, the axle line of Front Range Off-Road, is proud to release their Toyota Drive Flanges! These units are CNC machined in the USA, from 4340 chrome-moly, and then heat treated for unparalleled strength. Like OEM units, these are drilled for the factory 7mm dowel pins, so you do not need to drill your hubs. Should you want to add more pins, 6 pin holes are provided. Diamond knows you don’t like beating your parts with hammers, so 2, 8mm threaded holes are provided to push the flanges and associated cones washers off smoothly and easily! Diamond wanted a secure and weatherproof cap, so aluminum caps were machined to seal up repeatedly with an o-ring, black anodized, and secured with stainless bolts! Every upgrade imaginable was made on these flanges, to ensure easy servicing of your hubs was possible, and the strongest flanges for your axles to engage into! Naturally these are available as a set with our legendary ARP Hub Studs Upgrade as well!
These flanges are for installing on an FJ80 front, as those caps are a little longer/deeper to allow for the longer stub on 80 series shafts. Aftermarket shafts would utilize the inner snap ring, oem birfs would need a 8mm spacer installed.