4Runner panhard link for 2010+. We built these for massive abuse! Starting with 1.25" DOM tubing, we thread each end of the heavy wall tubing to accept huge 7/8" chrome-moly rod ends (heim joints). We precision machine the tubes for wrench flats as well for easy adjustment, and tightening of the jam nuts. Since all the tubing is machined there's no error of alignment or welds to distort threats with weld bungs. Jam nuts and special stainless steel misalignments finish them off! These slip into the stock brackets, and are designed to use the stock hardware for a perfect oem type fit! With the freedom of movement of these rod ends, these links allow for smoother travel, and increased drop of the suspension (provided the shocks allow it).
Set these up with our Lower Links, and Upper Links for a failure proof link setup on your Toyota 4Runner, and adjust your wheelbase, pinion angle, and axle location perfectly to your truck!