4Runner Panhard Link (3rd Gen, Rear)

$145.00
(4 reviews) Write a Review
SKU:
3rdgenPANHARD
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

4Runner panhard link for '96-'02. We built these for massive abuse! Starting with 1.25" DOM tubing, we thread each end of the heavy wall tubing to accept huge 7/8" chrome-moly rod ends (heim joints). We precision machine the tubes for wrench flats as well for easy adjustment, and tightening of the jam nuts.  Since all the tubing is machined there's no error of alignment or welds to distort threats with weld bungs.  Jam nuts and special stainless steel misalignments finish them off! These slip into the stock brackets, and are designed to use the stock hardware for a perfect oem type fit! With the freedom of movement of these rod ends, these links allow for smoother travel, and increased drop of the suspension (provided the shocks allow it).


Set these up with our Lower Links, and Upper Links for a failure proof link setup on your Toyota 4Runner, and adjust your wheelbase, pinion angle, and axle location perfectly to your truck!

4 Reviews Hide Reviews Show Reviews

  • 5
    Rock Solid

    Posted by Garrett Tucker on 17th May 2022

    If you are looking to replace your old rusty pan hard bar or have lifted your third gen look no further. This bar is solid and the joints are top notch and the adjustability is effortless. Finally a company that has pride in their work and puts out an outstanding product. Customer for life. P.S. the sticker is killer.

  • 5
    It's adustable!

    Posted by DC on 16th Nov 2020

    seems stout, one solid piece with no welded on bungs for the heims. I was able to recenter my axle with this after lifting my runner with LC 8 wraps in the back.

  • 5
    3rd gen 4Runner Panhard bar

    Posted by Unknown on 17th May 2019

    Top notch build quality. Solid!

  • 5
    Top quality panhard bar

    Posted by MikeL on 5th Dec 2017

    As expected from FROR, a top quality panhard bar for the 3rd gen 4runners. The addition of the wrench slots on the end of the bar make it nice for easy adjustments and tightening of the rod ends.