4Runner Lower Control Arm Links (5th Gen, Rear)

4Runner lower links for 2010+. We built these for massive abuse! Starting with 1.75" DOM tubing, we thread one end of the heavy wall tubing to accept huge 1.25" chrome-moly rod ends (heim joints). On the other end we utilize an offset bushing to allow for more suspension droop. We precision machine the tubes for wrench flats as well for easy adjustment, and tightening of the jam nuts.  Since all the tubing is machined there's no error of alignment or welds to distort threats with weld bungs.  Jam nuts and special stainless steel misalignments finish them off! These slip into the stock brackets, and are designed to use the stock hardware for a perfect oem type fit! With the freedom of movement of these rod ends, these links allow for smoother travel, and increased drop of the suspension (provided the shocks allow it).

Set these up with our Upper Links, and Panhard for a failure proof link setup on your Toyota 4Runner, and adjust your wheelbase, pinion angle, and axle location perfectly to your truck!